Philips GC8600 Série Mode D'emploi page 22

EnGlish
22
Problem
The steam
generator has
switched off.
The steam
generator pro-
duces a pump-
ing sound.
Possible cause
The steam generator is
not switched on.
The auto-off function is
activated automatically
when the steam genera-
tor has not been used for
more than 10 minutes.
Water is pumped into the
boiler. This is normal.
Solution
Insert the plug in the wall socket and
press the on/off button to switch on
the steam generator.
Press the power on/off button to
switch on the steam generator again.
If the pumping sound continues non-
stop, switch off the steam generator
and remove the plug from the wall
socket. Contact an authorised Philips
service centre.