Hama TH-130 Mode D'emploi page 4

• The thermometer/hygrometer is now
ready for use.
• After calibration, the top half of the
display shows the measured temperature
value, while the bottom half of the
display shows the measured air humidity
value.
• If the measured value is outside of the
measuring range, LL.L (value lower
than minimum) or HH.H (value higher
than maximum) will appear on the
temperature display.
• Once the elements on the display
begin to dim, replace the batteries as
described in
4. Getting Started.
6.1. Celsius / Fahrenheit
• Press the °C/°F button to switch between
°C and °F for the temperature display.
Display
Not displayed
4
Temperature
range
–
20°C – 26°C /
68°F – 78.8°F
–
< 20°C / 68°F
> 26°C / 78.8°F
6.2. Maximum and minimum
temperature and humidity values
• The thermometer/hygrometer
automatically stores the maximum and
minimum temperature and humidity
values.
• Repeatedly press the MAX/MIN
button to switch between the current
temperature and humidity, minimum
temperature and humidity (MIN) and
maximum temperature and humidity
(MAX).
• The maximum and minimum values are
automatically deleted every 24 hours.
6.3. Comfort display
The thermometer/hygrometer displays the
following comfort ranges based on the ratio
between the current room temperature and
room humidity:
Humidity range
< 40%
40% – 70%
70%
40% – 70%
Comfort range
– Dry –
Ambient air too dry
– Comfort –
Ideal temperature
and humidity
– Moist –
Humidity too high
– No indicator –