HIKOKI UB 18DD Mode D'emploi page 7

Keep the light and the object being illuminated
0,5m
at least 0.5 m apart.
Switching ON
Switching OFF
Warning
V volts
A amperes
Hz hertz
W watts
ta ambient temperature
IPXX IP symbol
Class II tool
APPLICATIONS
Illumination of work site
SPECIFICATIONS
Model
Voltage
LED (white)
Brightness
adjustment range
3.0 Ah: Approximatery 0.6 hours
Operating
10000 lm 5.0 Ah: Approximatery 1.1 hours
time
8.0 Ah: Approximatery 1.8 hours
(Using full
3.0 Ah: Approximatery 5.5 hours
charged
1000 lm 5.0 Ah: Approximatery 9 hours
battery)
8.0 Ah: Approximatery 14.5 hours
Battery available for
this tool*
1
4.7 kg (BSL1830C) (with AC cord)
Weight*
2
5.3 kg (BSL36B18) (with AC cord)
*1 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
*2 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
CHARGING
Before using the tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 4.
UB18DD
18 V
×216
1000–10000 lm
Multi volt battery, BSL18 Series
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
Indications of the pilot lamp (RED)
Lights on for
0.5 seconds and off
Before
for 0.5 seconds
charging
(Blinks)
Lights continuously
While
(Lights)
charging
Lights on for
0.5 seconds and off
Charging
for 0.5 seconds
complete
(Blinks)
Lights on for
1 second and off for
Overheat
0.5 seconds
standby
(Blinks)
Lights on for
0.1 seconds and off
Charging
for 0.1 seconds
impossible
(Flickers)
● Regarding the temperatures and charging time of the
battery.
The temperatures and charging time will become as
shown in Table 2.
Battery
Charging voltage
Weight
Temperatures at which the battery
can be recharged
Charging time for battery capacity,
approx. (At 20°C)
1.5 Ah
2.0 Ah
2.5 Ah
3.0 Ah
4.0 Ah
5.0 Ah
6.0 Ah
8.0 Ah
Number of battery cells
NOTE
The recharging time may vary according to temperature
and power source voltage.
7
English
Table 1
Plugged into power
source
—
—
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Malfunction in
the battery or the
charger
Table 2
Charger
UC18YFSL
V 14.4–18
kg 0.5
0°C–50°C
22
min
min 30
min 35
min 45
min 60
min 75
min 90
min 120
4–10