Télécharger Imprimer la page

Husqvarna BLi100C Manuel D'utilisation page 4

Masquer les pouces Voir aussi pour BLi100C:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING: Injury to persons.
CAUTION: Damage to the product.
Note: This information makes the product easier to use.
Battery safety
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Note: Save all warnings and instructions for future
reference.
Only use Husqvarna original batteries for Husqvarna
products and only charge them in original QC330 or
QC500 battery charger from Husqvarna. The batteries
are software encrypted.
The rechargeable BLi100C, BLi200C, BLi300C battery
(1), is exclusively used as a power supply for the
relevant Husqvarna cordless appliances. To avoid injury,
the battery must not be used as a power source for
other devices.
Do not dismantle, open or shred batteries.
Do not expose cells or batteries to heat or fire. Avoid
storage in direct sunlight.
Regulary check that the battery charger and the
battery are intact. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
Never use a battery or appliance that is faulty,
modified or damaged.
Never attempt to modify or repair the battery. Entrust
all repairs to your authorized dealer only.
To charge the battery
Charge the battery before the first time of operation. The
battery is only 30% charged when delivered.
4
Safety
Do not subject batteries to mechanical shock.
Do not remove a battery from its original packaging
until required for use.
In the event of leaking, do not allow the liquid to
come in contact with the skin or eyes. If contact has
been made, wash the affected area with copious
amounts of water and seek medical advice.
Keep batteries out of the reach of children.
Keep battery clean and dry.
Wipe the battery terminals with a clean dry cloth if
they become dirty.
Batteries need to be charged before use. Always use
Husqvarna QC330 or QC500 battery charger.
Do not leave a battery on prolonged charge when
not in use.
Remove the battery from the equipment when not in
use.
When battery is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting
the battery terminals together may cause burns or a
fire.
Keep the battery and the battery charger in a space
that is closed, dry and free from moisture and frost.
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
Put the battery in storage where the temperature is
between 5 °C (41 °F) and 25 °C (77 °F) and away
from open sunlight.
Put the battery charger in storage where the
temperature is between 5 °C (41 °F) and 45 °C (113
°F) and away from open sunlight.
Troubleshooting of the battery
The Connection LED (7) flashes red if the temperature is
incorrect or if the battery is empty. Make sure that the
ambient temperature is between -10 °C (14°F) and 40
°C (104°F), that the battery is not too hot and that it is
charged.
If the Connection LED (7) is red there is a permanent
battery error. Speak to your dealer.
Operation
CAUTION: Only charge the battery when
the surrounding temperature is between 5
°C (41°F) and 40 °C (114°F).
884 - 002 - 19.09.2018

Publicité

loading

Ce manuel est également adapté pour:

Bli200cBli300c