Dörr SNAPSHOT MINI Notice D'utilisation page 22

07.21 Overwrite
When the SD card is full camera may overwrite oldest files or alternatively quit function.
Press the navigation button (11)  to select On to overwrite the oldest images and video sequences or Off to turn off camera. To
save your settings press the OK button (12).
07.22 System
Indicates the software version.
08 | TEST RECORDINGS
In SETUP mode (slide control 09 on position SETUP), a test photo or video can be released and directly viewed.
To release a test photo, press the navigation button (11) . To view the test photo, press the OK button (12). To release a test video,
press the navigation button (11)  to enter the video mode (
navigation button (11)  again the recording stops. To view the video preview image, press the OK button (12). The video cannot
be played.
09 | MOUNTING AND DIRECTING THE CAMERA
09.1 Mounting
Mount the camera to a tree, pole or any suitable object using the supplied mounting strap (19). Do not fix the belt finally at this stage.
Best distance to object is 3 - 10 meters. Larger distances are also possible, however with less reliability of motion sensor. We
recommend taking a few test shots and to finally fix the camera afterwards.
Our optional accessories such as the patented DÖRR holding fixture in combination with the DÖRR universal adapter are designed
for fast and easy mounting of the camera at a tree, wall or other object. The camera clicks into the holding fixture and is firmly held
in place. The camera can be removed easily for a quick change of place of action. The ball head with fixing screw ensure a flexible
direction of the camera. The fixture is rotatable by 360° and swivels up to 30° in all directions.
DÖRR Holding Fixture Multi for SnapShot camouflage
DÖRR UNI-1 Universal Adapter for Holding Fixture
Use a cable lock (available as accessory) and pull it through the eyelet for cable lock (18) on the backside of the camera to secure it
against theft.
09.2 Directing
The camera needs to be well directed for proper pictures. Hang up camera in about 0,75 - 1 m height, slightly tilting ahead. The
camera lens (05) should now point to where the photographic object is expected to show-up.
Switch the slide control (09) to SETUP and close the camera housing. If you move in front of the camera the LED indicator (02) is
flashing red and the motion sensor is active. The red LED (02) will flash as long as you are moving within the detection area.
We recommend taking test photos to see the area covered by the camera. For this purpose, turn off the camera first. Then switch
the slide control (09) to ON position and close the camera. After approx. 5 seconds the camera is ready (while preparing the LED
indicator (02) flashes red).
22
). Press the navigation button (11)  to start the recording. By pressing
Item no. 204490
Item no. 204495
doerr-outdoor.de