Télécharger Imprimer la page

Dörr SNAPSHOT MINI Notice D'utilisation page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

07 | SETTINGS & FUNCTIONS
07.1 Mode
Press the navigation buttons (11)  or  to select between PHOTO (image), VIDEO (video recording) or P + V (combined photo
video function). Using the combined P + V photo video function, your camera will take a photo and directly afterwards
a 10 second video sequence. To save your settings press the OK button (12).
07.2 Photo size
Press the navigation buttons (11)  or  to select between 4 picture resolutions: 2MP, 5MP, 8MP, 12MP. To save your settings
press the OK button (12). The highest resolution will not always provide the best result. Picture noise can increase under bad light
conditions.
07.3 Video size
Press the navigation buttons (11)  or  to select between 2 video resolutions: 720x480 (VGA) or 1280x720 (HD). To save your
settings press the OK button (12).
07.4 Photo No.
Press the navigation buttons (11)  or  to select number of photos per release. The camera can take 1 to 9 pictures in
series. To save your settings press the OK button (12).
07.5 Video length
Press the navigation buttons (11)  or  to select length of video recording. Video length can be set from 10 to 60 seconds.
To save your settings press the OK button (12).
07.6 PIR Interval
Pause of motions sensor – determines the duration during which the motion sensor will not be active after having taken a record.
Can be set from 10 seconds to 60 minutes.
Press the navigation buttons (11)  or  to select the minutes.
Press the navigation button (11)  to switch to seconds. Press the navigation buttons (11)  or  to select the seconds.
To save your settings press the OK button (12).
07.7 Timing shot
Setting the interval for sequential shots. The interval for sequential shots can be set independently from the motion detector.
Press the navigation button (11)  to select On. Confirm with the OK button (12). In the next step, the interval can be determined:
Timing Delay
19
Set the time gap between sequential shots in hours, minutes, seconds (e.g. 01:00:00 means one picture
every hour).
Press the navigation buttons (11)  or  to select the hours.
Press the navigation button (11)  to switch to minutes.
Press the navigation buttons (11)  or  to select the minutes.
Press the navigation button (11)  to switch to seconds.
Press the navigation buttons (11)  or  to select the seconds.
To save your settings press the OK button (12).
When timing shot function is activated the LCD Display (08) shows the symbol
.
doerr-outdoor.de

Publicité

loading

Ce manuel est également adapté pour:

204505