Publicité
GB
Brushcutters
INTENDED USE
Before using our brush cutter, please read this rnanual
carefully to understand the proper use of your unit.
Keep this manual handy.
TECHNICAL SPECIFICATION
Engine Type
Rated Output Power, W
Displacement, сm
3
No-load speed, rpm
Fuel tank capacity, L
Cutting line, мм
Weight, kg
PRODUCT ELEMENTS
1
Handle
2
Shoulder Strap
3
Air cleaner
4
Blade
5
Haie bracket
6
Engine switch button
9
Throttle lever
12 Outer pipe
13 Safetyguard
15 Fuel tank
16 Starter
SAFETY
Instructions contained in wornings within this
manual marked with a symbol concern critlcal
points which must be taken into consideration
to prevent possible serious bodily injury, and for this
reason you are requested to read ail such instruc-
tions carefully and follow them wlthout fail.
4
Air cooled
2-stroke petrol
1100
33,0
7000
0,8
2
5,50
1
WARNING LABELS ON THE MACHINE
Read owner's manuai before operating this
machine
Wear head, eye and ear protection.
Warning/Attention.
Keep ail chiidren, bysfanders and heipers
15 meters away from the brush cutter.
IMPORTANT! If warning seals peei off or be-
come soiled and impossible to read, you
should contact the dealer from which you
purchased the product to order new seals and affi x
the new seal in the required location.
WARING! Never remodel your brush cutter.
We won't warrant the machine, if you use the
remodeled brush cutter or you don't observe
the proper usage written in the manuai.
SAFETY
Beforeusing the machine
• Read this owner's manual carefully to understand
how to operate this unit properly.
• This product has been designed for use in cutting
gross, and it should never be used for any other pur-
pose.
• You should never use this brush cutter when under
the infl uence of alcôhoi, when suffering from ex-
haustion or lack of sieep when suffering from drow-
siness as a resuit of having taken cold medicine, or
at any other time when a possibility exists that your
judgment might be impaired or that you might not
be able to operate the brush cutter properly and in a
safe manner.
• Avoid running the engine indoors. The exhaust gas-
es contain harmful carbon monoxide.
• Never use your brush cutter uhder crrcumstances
like those described below: When the ground is slip-
pery r when other conditions exist which might make
it not possible to maintain a steady posture while us-
ing the brush cutter.
• At night, at times of heavy fog, or at any other times
when your fi eld f vision might be limited and it would
be diffi cult to gain a clear view of the area.
• During rain storms, during lightnirig storms, at times
of strong or gale-force winds, or at any other times
when weather conditions might make it unsafe to
use this product.
• When using this product for the fi rst tirne, before be-
ginning actual w;rk, learh to handle the brush cutter
from skilled worker.
• Lack of sleep, tiredness, or physical exhaustion re-
sults in lower attention spans, and this in tum leûds
to accidents and injury. Limit the amount of time over
which the brush cutter is to be used continuously fo
somewhere around 30-40 minutes per session, and
take 10-20 minutes of rest between work sessions.
Publicité
