Battery recharge time: 2 hours, Integral charge status indication.
Failed sensor
indication:
Sensor life:
Operating
environment:
Dimensions:
Weight:
This instrument has been designed and manufactured to provide unlimited serv-
ice. Should the unit be inoperative, after performing the recommended mainte-
nance, a no-charge repair or replacement will be made to the original purchas-
er if the claim is made within TWO years from the date of purchase.
This warranty applies to all repairable instruments that have not been tampered
with or damaged through improper use. This warranty does not cover batteries,
sensor, battery charger, or any other materials that wear out during normal oper-
ation of the instrument.
Before returning your instrument for repair please make sure that you have
carefully reviewed the Unit Maintenance section of this manual to determine if
the problem can be easily fixed. Make sure that you have either replaced or
cleaned the filter and verify sensor functionality and that the batteries are work-
ing properly BEFORE returning the unit. If the instrument still fails to work prop-
erly contact customer service at the toll free number below to obtain an RMA
number and instructions. Repaired or replaced tools will carry an additional 90
day warranty. For more information please contact info@atp-europe.de.
Top 5 LEDs flash red, pump off
100 to 150 hours.
32ºF to 122ºF (0ºC to 50ºC), 0% to 95%
RH non-condensing
10.25" L x 2.5" Dia (26cm L x 6.5 cm Dia)
Approximately 16 ounces (452 grams)
WARRANTY
18