Approved Combinations Of Cutting Attachment And Deflector; Mounting The Deflector - Stihl FSE 52 Notice D'emploi

Edging
The unit can be quickly converted to a
power edger (see "Converting Unit to
Power Edger").
Use the unit as shown.
N
Guide the mowing line along the
N
edge of the lawn – the bump guard
maintains the required ground
clearance.
Disposal
Do not throw cuttings in the garbage can
– they can be composted!
FSE 52
Approved Combinations of
Cutting Attachment and
Deflector
Cutting Attachment
The trimmer comes from the factory with
the AutoCut 2-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see

"Mounting the Deflector".

Mounting the Deflector
2
Push the deflector (1) into the
N
groove (arrows) in the motor
housing (2) as far as stop – the
holes in the deflector and motor
housing must line up.
English
29