dirna Bergstrom bycool SLIM FIT DAF Instructions De Montage page 33

SLIM COOL
Screw (2) M6 L=36 hexagons to the rear
6
section in the direction of travel and (2) L=76
hexagons to the front section with a rubber
washer and wide-rimmed washer and tighten.
Remove the M4 screws from the front and
7
leave this hanging by the wires in order to
place (2) spacers in the rear part of the front,
then return it to its original position.
7
Position the console and move the unit until it
8
is aligned.
9 Once aligned, remove the console and tighten
the M8 hexagons of point 4 as far as they will
go, in order to fully secure the unit.
Rubber washer
Wide-rimmed washer
Hexagon M-F
33
Air conditioning for vehicles
L=36
L=76
EN
6
7
8