Sunjoy Hillgard Guide De L'utilisateur page 4

Hardware Pack 1
Part
AA
BB
CC
DD
W
Fig. 1: Assemble the post cap on the post, then secure the post bases with screws (AA) and flat
washers (BB).
Fig. 2: Insert the long beam (B1) into the short beam (B2), then secure the connector (E) and beams
together.
Fig. 3: Secure the beams (B1 and B2) to the post (A) with bolts (DD) and flat washers (BB).
Fig. 4: Secure the netting tube (C) to beam (B1 and B2) by using bolts (CC) and flat washers (BB).
Description
M6 x 15 Screw
M6 Flat washer
M6 x 15 Bolt
M6 x 25 Bolt
M6 Wrench
Quantity
8 PCS
48 PCS
24 PCS
16 PCS
1 PC
Image