Elio Mono & Stereo
FM Mode
Selecting FM Mode
Press MENU button and turn the NAVIGATE/SELECT button until to select FM mode.
For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Or it will play the
last FM station you were listening to.
To manually change the FM frequency, make sure no other order/system setting is going on, turn
TUNE knob to change the frequency by 0.05MHz per step.
To automatically scan, while FM frequency shows up, turn TUNE knob clockwise or anticlockwise,
and then press SCAN button, your radio will skip forwards or backwards until it reached the next
available station.
Pre-setting your favorite DAB stations
Press and hold the Fav button, when display showing "saving station icon" and "saving position number",
Turn the NAVIGATE/SELECT button to change the number you want, and press to store the station.
Recalling preset DAB stations
Press the "Fav" button, and it will show the saved presets if any saved. Select the station you want to
hear, by turning the NAVIGATE button, then press the "NAVIGATE" button to confirm your selection.
Additional settings
Additional FM settings can be found in the configuration menu under FM setup
To set the FM sound quality: Press Menu → Configuration → FM setup.
There are two options: Mode: Set mono or Set stereo
Threshold: Seek Threshold or Stereo Threshold
There are three sub-option for seek threshold or stereo threshold: Strong, Default, Weak
11