AEG BHT 5640 Mode D'emploi page 29

Cleaning and Maintenance
WARNING:
• Turn off the device and disconnect the mains adapter
from the mains supply when cleaning.
• Do not immerse the mains adapter in water!
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after
use.
• Clean the casing with a slightly damp cloth, if necessary.
Shaver and trimmer attachments
• Remove the comb attachments and trimmers.
• Clean the attachments under warm running water using
the provided cleaning brush.
CAUTION:
Do not clean the shaving foil of the shaver with the
cleaning brush.
• The shaving head of the shaver attachment can be re-
moved. Press the surfaces at the side of the shaving head
together and pull it off.
• Rinse the shaving head under warm running water.
• Clean the shaving blades with the cleaning brush.
• Let the cleaned parts dry.
• Then re-attach the shaving head to the shaver attach-
ment. It must click into place.
• Regularly apply 1 – 2 drops of non-resinous and acid-free
oil to the shaving blades of the trimmer (7, 8, 14).
Noise emission
The workplace-related emission value is less than 70 dB(A).
Technical Specifications
Model: ................................................................................BHT 5640
Net weight incl. mains adapter: ............................approx. 0.2 kg
Mains adapter
Protection class: ................................................................................II
Voltage supply: .......................................AC 100 - 240 V, 50/60 Hz
Output: ............................................................... DC 3.0 V, 1000 mA
Battery: ..................................................2 x 1.2 V, 600 mAh, NiMH
Running time: .............................................................60 mins. max.
Charging time: .................................................................... 12 hours
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
Remove / Dispose of Rechargeable Bat-
teries
This unit is equipped with a rechargeable Ni-MH battery.
Remove the battery before disposing of the unit.
As a consumer you are legally bound to return exhausted
batteries/rechargeable batteries.
WARNING:
Disconnect from mains power supply before removing the
battery!
• Use a small Phillips screwdriver to loosen the screw on
the back of the device. Open the housing.
• Remove the rechargeable batteries.
• Cut the wires to the batteries with a pair of scissors.
Return the battery at a collection point for batteries and/or
hazardous waste. Ask your municipality for further informa-
tion.
Disposal
Meaning of the "Wheelie Bin" Symbol
Take care of our environment, do not dispose of electrical
applicances via the household waste.
Dispose of obsolete or defective electrical appliances via
municipal collection points.
Please help to avoid potential environmental and health
impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
Your municipality provides you with information about col-
lecting points.
English
29