Channel Master CM-3016 Mode D'emploi page 9

(See Fig. 4) NOTE: Do not attach transmission wire or
balun to these points. Transmission wire or balun are
attached to the bottom terminals of the folded UHF
dipole as shown in Fig 5.
Phasing Rod
Fig 4
4. Attach transmission wire (or balun, if coax installation)
to tap-off terminals at the bottom of the UHF dipole, as
shown in Fig. 5 (or 6 if a straight UHF screw dipole).
Folded
UHF Dipole
Fig 5
Coaxial
Dipole
Terminal
Tap-Off Terminals
Matching Transformer
Coaxial Cable
Matching
Transformer
7