Channel Master CM-3016 Mode D'emploi page 11

6. If the antenna has boom braces, secure them to the
mast below the antenna as shown in Fig. 9. NOTE: Make
sure the main crossarm is straight when tightening
U-bolt nuts securing the boom braces.
7. To align the antenna, point the narrow end of the
antenna towards the transmitter location and adjust for
best picture quality or signal strength. (See Fig. 10)
Fig 10
Antenna
Crossarm
Fig 9
Boom
Brace
Mast
U-Bolt
TOWARDS
TRANSMITTING
STATION
9