I Shut-Down; J Storage; K Maintenance / Servicing; Troubleshooting - Leifheit CleanTenso Mode D'emploi

Shut-down
I
16. T o turn off the steam cleaner, press the ON/OFF
switch [5] and pull the mains plug [19] out of the wall
socket.
P lace the steam cleaner on a suitable surface
(e.g. tile floor) where any residual moisture in the noz-
zles/cleaning cloth cannot damage the floor surface.
Allow the steam cleaner to cool down completely.
E mpty the water reservoir [9] and allow it to dry inter-
nally before screwing the cap [10] back on.
A llow the steam cleaner to cool down sufficiently before
removing the microfibre floor cleaning cloth.
Storage
J
We recommend storing the steam cleaner with the carpet
glider base [18] attached. However, the microfibre floor
cleaning cloth should be removed to prevent the leakage of
water and formation of mould and mildew.
Rotate both of the hooks for the retractable cable [6 and 14]
into the storage position as illustrated and wrap the mains
cable [20] around both hooks.
Press the release button for the folding handle [3] and
move the handle [1] to store the appliance compactly.
Only store the appliance once it has cooled down complete-
ly and the water reservoir has been emptied.
Store the appliance in a cool, dry place.
Do not expose the steam cleaner to extreme solar radiation
or weather effects such as rain or frost etc.
Maintenance / Servicing
K
Steam cleaner
Always remove the mains plug from the
wall socket before attempting any cleaning or
repair work.
To clean the steam cleaner, we recommend occasionally
wiping it with a moistened towel. Do not use any abrasives,
alcohol, benzene or chemicals on the device.
Microfibre floor cleaning cloth
The microfibre floor cleaning cloth [19] may be washed in a
washing machine (max. 60° C).
Do not use bleach or fabric softener.
Allow the cloths to dry fully before storing.
Replacement floor cleaning cloths can be
purchased in stores.

Troubleshooting

L
Malfunction
The appliance
does not turn
on, the upper
(red) power
indicator light
fails to light
up.
The appliance
is not emit-
ting steam, the
power indica-
tor (red) lights
up.
The appliance
is not emitting
any steam, the
(red) power in-
dicator and the
(blue) steam
indicator light
light up.
There is a re-
duced amount
of steam.
Other mal-
functions
For further help or enquiries/feedback as well as
additional information on servicing and replace-
ment parts, please contact Leifheit Customer
Service.
(Contact information for this is shown on Page 11).
Possible cause Solution
The mains plug Reinsert the mains
is not in the plug / Check the
socket / power circuit breaker or
or fuse issue in consult an electri-
the house. cian.
The appliance Wait about 30 sec-
needs more onds until the ap-
time to heat pliance has warmed
up. up.
The (blue) steam
indicator light lights
up.
The water Fill the water res-
reservoir is ervoir.
empty.
The appliance Wait until the ap-
automati- pliance has cooled
cally turns off down sufficiently
to prevent and fill the water
overheating reservoir.
as soon as the
reservoir is
emptyand the
steam button is
then pressed.
The water Fill the water res-
reservoir is ervoir.
empty.
The steam
outlet is
clogged.
Never place object-
sin any openings
of the appliance to
clean it!
Contact Leifheit
Customer Service!
Contact Leifheit's Customer Service
department.
GB
15