Troubleshooting - Teac R-5DAB Mode D'emploi

If you have problems with your system, look
through this chart and see if you can solve the
problem yourself before calling your dealer or
TEAC service centre.
General
Standby indicator does not light.
e When the unit is used on battery power,
the indicator does not light to save the
battery life.
No power
e If the batteries are discharged, connect the
AC adaptor to recharge the batteries.
e Check the connection to the AC power
supply. Check and make sure the AC source
is not a switched outlet and that, if it is,
the switch is turned on. Make sure there
is power to the AC outlet by plugging
another item such as a lamp or fan into the
outlet.
No sound
e Turn the unit on and adjust the volume.
e Selec t the source by pressing the
FUNCTION button.
e Pull out the headphone's plug from the
PHONES jack.
The sound is noisy.
e The unit is too close to a TV set or similar
electronic appliances. Install the unit
further from them, or turn them off. Also
try a different electrical outlet or use your
R-5DAB on battery power to see if the noise
is coming from your electrical connection.

Troubleshooting (1)

Timer won't work.
e Set the timer (see pages 29-30).
Messages on the display do not appear in my
preferred language.
e When you use the unit for the first time and
DAB tuner
No sound.
e Ensure that the unit has been able to locate
"No DAB Station" appears on the display.
e Confirm that a DAB broadcast is available in
Cannot listen to the selected station.
e Confirm that you have pressed the MULTI
A burbling sound is heard on some stations.
e A DAB system is able to produce quality
after a factory reset, the language shown
on the display is set to English. Follow the
instructions, "Language" on page 20 for
details on how to change the language.
a DAB station.
your area. For details on the procedure of
automatic scanning (full scan) see page 18.
JOG knob to listen to a station. The station
you are currently listening to will be
displayed on the first line of the display, the
second line will show other station options
as you scroll through the station name list.
Press the MULTI JOG knob to determine
your selection.
audio from a low level signal, but when
the signal level is too low, a "burbling"
sound might be heard. To reduce this, try
repositioning your antenna to maximize
signal reception.
Continued on the next page
33 33