Teac R-5DAB Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cancelling a timer setting
After setting the timer, you can cancel the timer
setting.
The procedures below are to cancel the ALARM
1 timer setting.
Follow the similar steps to cancel the ALARM 2
timer setting.
1
Press the ALARM 1 button.
2
Turn the MULTI JOG knob to select
"Off", and then press the knob to
determine your selection.
"Alarm Saved" appears.
< To recall the alarm setting that was cancelled
last, press the corresponding ALARM button
and then follow the normal timer setting
procedure.
1
2
Snooze
You can put the unit in standby temporarily after
the timer has turned on the unit.
Press the SNOOZE button once for the
timer to go off again in 5 minutes.
< The following snooze settings are available:
5, 10, 15 and 30.
If you want the timer to go off again in 10,
15 or 30 minutes, press the SNOOZE button
twice, three or four times respectively
instead.
The ALARM indicator on the display starts
blinking. "Snooze" also appears and the unit is
counting down the time remaining before the
timer goes off again.
The unit enters STANDBY mode now.
< After the snooze time expires, the timer goes
off again. For the timer to go off in another 5
minutes, press the SNOOZE button again.
< Press the STANDBY/ON button to stop this
function.
31
31

Publicité

Table des Matières
loading

Table des Matières