Havit PJ202 Manuel De L'utilisateur page 13

Starting Screen Mirroring
Important:
Before screen mirroring, please press button "S" on the projector or press
Input Source interface and select Screen Mirroring.
Screen Mirroring through Wireless Connection
For iOS System
*Screen Mirroring via Router´s WiFi
1. Turn on the projector, select Screen Mirroring as the input source to enter the
Screen Mirroring Interface.
2. Press OK to enter WiFi selection interface and connect the projector to your
router´s WiFi with correct password
3. The WiFi icon on the interface will change from
will be displayed on interface of Screen Mirroring after a successful connection.
4. Get back to the WiFi setting of your iOS mobile device, then connect it to the
SAME router´s WiFi.
5. Activate Screen Mirroring/Airplay Mirroring on your iOS mobile device and search
for the projector, then select HAVIT PJ202 from the searching results to connect.
6. The content of your iOS mobile device will be mirrored to the wall/screen after
WiFi connection.
Tips:
1. If you´d like to connect another router´s WiFi, please press OK in the Screen
Mirroring Interface, then repeat the procedures mentioned in the section of
Screen Mirroring via Router´s WiFi.
2. If you already connected your projector with the WiFi and now you want to
connect it with iOS device cellular data please go to the WiFi Selection, and
disconnect the current WiFi connection the follow the steps in the section of
Screen Mirroring via Cellular Data.
to
13
to enter
, and the router´s WiFi