Havit PJ202 Manuel De L'utilisateur page 12

SCREEN MIRRORING
Know System Settings before Screen Mirroring
Step 1:
Press button "S" on the projector or press
interface, then select Screen Mirroring.
Step 2:
In the interface of screen Mirroring, press OK to enter the WiFi selection interface.
iOS Connect by Cables
1. Connect the phone to the USB slot of the projector via the original iPhone
charger cable. (Cable has USB port and Lighting port)
2. Click "Trust" when connecting with the iPhone
Android Cast
Connect with Android Phone
•
1. Open the wireless display on your Phone.
2. Find the device named "HAVIT PJ202" and connect it.
iOS Cast
Connect with iOS Phone via screen mirroring:
•
1. Open WIFI and find "HAVIT PJ202" from your phone. Then input the password
"12345678" on your phone.
2. Click Airplay/Screen mirroring on your phone and connect "HAVIT PJ202".
Connect with iOS Phone via WIFI:
•
1. Press OK to enter the WIFI selection interface from the projector. Choose your
WIFI and select password by remote control.
2. Connect the same WIFI from your phone.
3. Click Airplay/Screen mirroring on your phone and connect "HAVIT PJ202".
Note: To enter WiFi Selection interface, please press OK in the interface of Screen
Mirroring.
on the remote to enter the Input Source
12