Bresser 52-83100 Mode D'emploi page 22

go off after a brief pause and the device has
been switched off.
Caution!
Please note that all the settings made revert
to default settings when you switch the USB
hand held microscope off.
3.2 Taking a Photograph
Switch the microscope on.
1.
Press the Function button (Fig. A, 4), until
2.
the icon (Fig. D, 15) is displayed at the
top left of the LCD monitor (Fig. A, 1).
Place the microscope on an object, e.g.
3.
a document. The object is displayed on the
LCD monitor. Focus the image using the
scroll wheel (Fig. A, 8).
Hold the microscope by its casing and
4.
press the Record button (Fig. A, 6).
Note:
You can magnify or reduce the image by
using or
will become more "grainy" due to the digital
zoom. This is not an error.
22
(Fig. A, 5 + 7). The image
3.3 Recording a Video
Switch the microscope on.
1.
Press the Function button (Fig. A, 17) until
2.
the icon (Fig. E, 16) is displayed at the
top left of the LCD monitor.
Place the microscope on an object, e.g.
3.
a document. The object is displayed on the
LCD monitor. Focus the image using the
scroll wheel (Fig. A, 8).
Press the Record button (Fig. A, 6) to start
4.
recording. Press the Record button again to
stop recording.
3.4 Using the Digital Zoom
Before you take a photograph or record
video, you can zoom by using
A, 5 + 7). The digital zoom function allows
you to magnify your object up to 4x.
3.5 Using the Optical Zoom
Move the scroll wheel (Fig. A, 8) to the left
or the right to adjust the optical magnification
smoothly between 3.5x and 35x.
or (Fig.