Signature CUVEES63N Manuel D'utilisation page 50

Natural functioning of your wine cellar to take into
account:
The internal temperature of the wine cellar will evolve
permanently at + or - 3 degrees of temperature desired,
because your cellar controls the temperature which
evolves naturally over the minutes.
Indeed, as soon as the internal temperature goes back to
more than 3 degrees of the desired temperature, the
thermostat will restart the engine to cool slowly the cavity.
Once the temperature requested is again reached and
even exceeded, then the thermostat will shut down the
engine, this work is permanent, which explains why indoor
temperature will work continuously between 9 and 15
degrees for example for a temperature required at 12
degrees (the temperature average in the middle of the
cellar over a few hours operation will be close to 12
degrees).
So do not worry if you see that the temperature changes
constantly, it's precisely the work of your cellar to ensure
an average temperature close to your request. Do not
open the doors too often to control the temperature at
the risk of disturbing the thermostat by bringing in warm,
moist air
Attention!
When the temperature sensor is faulty following power
outage or bug, an error code appears.
E1 temperature problem in the wine cellar;
E2 ambient temperature problem;
CE for communication failure
Power outage
In the event of a power failure, all temperature settings will
automatically preserved, unless you change the setting of
the thermostat.
-48-