8. Rotate the door 180° and then relocate the door to the designated position.
Then screw the bottom hinge assembly on the left designated position and
tighten it after the door is leveled.
CARE AND MAINTENANCE
CAUTION!
Reposition, level the appliance, wait for at least four hours and
then connect it to the power socket.
This appliance contains hydrocarbons in its cooling unit; maintenance and
recharging must therefore only be carried out by authorized technicians.
PERIODIC CLEANING
The equipment has to be cleaned regularly:
Do not pull, move or damage any pipes and/or cables inside the cabinet.
Never use detergents, abrasivepowders, highly perfumed cleaning products
or wax polishes to clean the interior as this will damage the surface and leave
a strong odour.
• Wash the inside surfaces with a warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
CAUTION!
Unplug the appliance before carrying out any maintenance ope-
ration.
• Wring excess water out of the sponge or cloth when cleaning area of the
controls, or any electrical parts.
• Wash the outside cooler with warm water and mild liquid detergent.