Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
POSITIONING
Adequate air circulation should be around the appliance, to prevent over-
heating. To achieve sufficient ventilation follow the instructions relevant to
installation.
Install this appliance at a location where the ambient temperature corres-
ponds to the climate class indicated on the rating plate of the appliance:
ELECTRICAL CONNECTION
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety mea-
sures not be observed.
CAUTION!
Any electrical work required to install this appliance should be
carried out by a qualified electrician or competent person.
Consult a qualified electrician or service technician if the grounding ins-
tructions are not completely understood, or if doubt exists as to whether the
appliance is properly grounded.
Before plugging in, ensure that the voltage and frequency shown on the ra-
ting plate correspond to your domestic power supply.
WARNING!
We recommend that you wait 4 hours before connecting and ins-
talling the appliance to allow the refrigerant to flow back into the
compressor.
Climate Class
Ambient Temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Publicité
