Safety Instructions - EUROM Weedburner XXL Mode D'emploi

THANKS
Many thanks for selecting a EUROM Weedburner. You have made a very good choice! We
hope that you will be completely satisfied with the product.
In order to get the very best from your weed burner, it is important that you read and make sure
you understand this instruction leaflet thoroughly and completely before use. Pay particular
attention to the safety instructions; these are provided in order to protect you and your
environment!
Keep the instruction leaflet somewhere safe so that you can consult it in future. Keep the
packaging: this is the best protection for your weed burner when storing it out of season. If you
ever lend your weed burner to someone else, please provide them with the instructions too.

SAFETY INSTRUCTIONS

The device;
1. Set up the device as instructed in this leaflet.
2. Do not change anything on the device and only use the accessories supplied by the
manufacturer.
3. Only use the device as set out in this leaflet.
4. Do not carry out your own repairs but ask a qualified engineer and always use original parts.
Failing to comply with points 2, 3 and 4 could lead to extremely dangerous situations and will
nullify the guarantee and the supplier's liability.
Connecting the gas bottle:
5. Never attach a gas-powered device to a gas bottle before reading the instructions!
6. Check the gas hose carefully before each use and do not use if you discover damage or
wear and tear.
7. Make sure that all equipment is ready for use before you connect the gas bottle.
8. Connect the gas hose to the burner first, and then to the gas bottle.
9. The best course of action is to connect the gas bottle outdoors but, otherwise, use a well-
ventilated space, away from any naked flames, any source of sparks or ignition and
electrical devices. Make sure that there are no other people nearby.
10. Never smoke when working with a gas device, especially when connecting the gas bottle.
11. Make sure that all taps and connectors on the device and gas bottle are undamaged,
secured properly and closed.
12. Check, after connection, to ensure there are no leaks and make sure that every connection
is gas-tight before using the burner.
13. Protect the gas bottle from temperature increases. Protect gas hoses against heat and
damage. Replace parts in good time.
14. Gas hoses must be replaced within 5 years of manufacture. In the event of intensive use or
exposure to non-optimum conditions (heat, cold, sheds, etc) they should be replaced more
frequently. You are advised to replace the hose once every three years.
EN
14