Jotul F 480 Série Manuel D'installation page 7

4.2 Installation
External air supply through the base
Through the oor
If connecting the Flex Hose through a hole in the oor,
the removable cover plates
Through the rear outlet in the base
2. If connecting a ex hose through the rear outlet of the
base, the shelf (A) and the internal back plate (B) must be
removed rst.
Fig. 5
3. If connecting a ex hose (Ø 80 mm) for external air supply
to the external air connector beneath the burn chamber,
the removable cover plates (A) must be knocked out rst
Installation of base/pedestal on the
burnchamber
.
4. Carefully lay the stove down on its back. Rest the stove on
a pallet and three packaging frames.
5. Before installing the base, the shelf (Fig. 4-A) and internal
back plate (Fig. 4-B) must be removed. Push the base
up to the burn chamber and secure it rmly with the four
screws (M8 x 25 mm) and washers provided. See
ENGLISH
.
7