Publicité
Les langues disponibles
Les langues disponibles
8.3
Maintenance activities
ELECTRIC SHOCK CAUSED BY LIVE PARTS
•
Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
Failure to follow these instructions will result in death or serious injury.
Replacing the relay fuse F1
Verify that the mains voltage is disconnected and cannot be switched on.
1. Open the upper part of the housing.
2. Remove the flat cable from the connector.
3. Remove the transparent cover from the relay fuse F1.
4. Fit a new relay fuse F1 (T 2 A).
5. Refit the transparent cover.
6. Connect the flat cable to the connector.
7. Fit the upper part of the housing and close it.
8. Apply mains voltage.
Maintenance
DANGER
Eurovac HV
EN
40
Publicité
