TIPS OF USING YOUR CHOPPER
* The device has a safety contact preventing the device from switching on if the lid is not
attached correctly.
* The mixer is not intended for crushing hard ingredients, such as coffee beans, ice or
frozen foods.
* Before putting foods into mixer, always attach the blade insert first.
* If the blade insert does not rotate or if it rotates hardly, unplug the power cord from power
socket.
* Check if there is any obstacle inside the container and remove it if it is the case.
* Check if the blade insert is attached correctly and can rotate freely.
* If the blade insert does not reach its full rotation speed with in several seconds, unplug the
device from power socket and before resuming to work, remove some of the foods from
the container.
* If any humid foods remain attached to the container walls, scrape them away using spoon
or similar object back to the centre of the container.
* Never use your fingers to do so!
* To achieve even crushing of foods, fill in pieces of the same size and do not overfill the
container above the MAX sign.
* If you wish to fine-crush the ingredients to a mash, they mush be boiled previously.
* Do not overfill the container.
* Do not switch the device on if the container is empty.
CLEANING
* Disconnect the motor block from the wall outlet
before cleaning.
* Wipe the motor block with damp cloth. It is
forbidden to immerse the motor block into the
water or any other liquids.
* Do not use abrasive cleansers or the sponge with
rough surface for cleaning.
* After using the chopper wash the chopper bowl
and lids in the warm soapy water, rinse and leave
until the complete dry out. Afterwards
assemble the appliance. Remember, the remnants