English - Milwaukee M18 HKP Notice Originale

TECHNICAL DATA
Battery Knockout Tool
Production code
Battery voltage
Nominal force
Diameter max.
Material thickness max.
Steel
Stainless steel
Weight according EPTA-Procedure 01/2003
(Li-lon 2,0 Ah)
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty
K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
GB Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
KNOCKOUT TOOL SAFETY WARNINGS
Use protective equipment. Always wear goggles when using the
machine. The use of protective clothing is recommended, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet and
ear defenders.
Keep hands and loose items of clothing away from cutting tools and
other moving parts.
Check the cutting tool for cracks or any other signs of wear before
using. Only use cutting tools and cutting devices if they are in
perfect technical condition.

English

Deutsch
14
M18 HKP
4560 30 02...
... 000001-999999
18 V
60 kN
100 mm
3,0 mm
2,5 mm
2,0 kg
65,8 dB (A)
76,8 dB (A)
1,28 m/s
2
h
1,5 m/s
2
Only operate the device with the cutting tool inserted into it.
Check whether the nominal width of the die corresponds to the
nominal width of the punch.
Use tool only with knockout dies and punches rated for the peak
output force of this tool. Any other use may cause injuries or
damage to the tool.
Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to get jammed and are
easier to control.
Do not use in or near live electrical panels. Only work on de-
energized electrical panels.
The device does not switch off automatically after reaching the
end position. After the pressing process, release the ON switch and
press the hydraulic release button.
In the event of problems during the crimping process, immediately
release the ON switch and press the unlocking button on the
hydraulic system. The valve will open and the piston will return to
its initial position.
Have damage repared immediately by an authorised workshop.
Compliance with the specified service work and service intervals is
mandatory.
Remove the battery pack before starting any work on the
appliance.
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in fluid or al-low a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
SPECIFIED CONDITIONS OF USE
The battery-operated electro-hydraulic knockout tool is intended
only for the purpose of cutting steel and stainless steel with the
dedicated dies and punches.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.Temperatures in excess of 50°C (122°F) reduce
the performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition Every six
months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or
by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash