Audio Cds; Playing An Audio Cd - Sony PlayStation 2 Mode D'emploi

Audio CDs

Playing an audio CD

Playing a CD
1
Turn on the console and insert the disc (
Follow steps 1 to 4 of "Starting a game".
The track numbers are displayed.
2
Using the directional buttons, select the track number you
want to play and then press the
Playback begins.
Hints
• If you turn on the console after inserting a disc, the track numbers are displayed
automatically.
• You can also start playback from the Browser screen (
Caution
To play an audio CD recorded in DTS format, you must connect a device with
a DTS decoder to the DIGITAL OUT (OPTICAL) connector (
that an extremely loud noise may be emitted if the device does not have a DTS
decoder or if it is connected to the AV MULTI OUT connector.
16
Playing an audio CD
page 11).
button.
page 31).
page 7). Note
Operating the CD player during playback
Using the directional buttons, select the icon for the desired track and then
press the button.
Icon (button*) Function
. (L1 button) Go to the beginning of the current or previous track
m (L2 button) Fast reverse
M (R2 button)
Fast forward
> (R1 button) Go to the beginning of the next track
N (START button) Start playback
X (START button) Pause playback
x
(SELECT button) Stop playback
* You can operate directly by pressing the analog controller (DUALSHOCK
buttons shown in parentheses.
Hint
You can also use the DVD Remote Control (for PlayStation
Ending audio CD playback
1
Using the directional buttons, select x and then press the
button.
Playback stops. Press the A (open) button on the console front to
remove the disc.
2)
®
2) (sold separately).
®