Audiovox VME 9725 NAV Mode D'emploi page 97

NOTE: If the rear-view video camera is connected and the unit is on, Camera
mode is selected upon shifting into REVERSE gear. If the monitor is in display
mode, the monitor automatically switches to CAMERA mode upon reverse
driving. When the reverse driving stops, the monitor returns to its original input
mode.
General Sub-menu Settings
Setting Options
User Interface Aqua
Color
Red
Blue
Amber
Green
Tuner Region Europe
TFT Standby Off
10s
20s
Dimmer Mode Auto
Night
Dark
Normal
Bright
RGB Light Adjust
Beep Off
On
Function
This setting allows the user to select five pre-
defined LED colors for the front panel illumination.
• AM Frequency Spacing - 9 kHz
• AM Frequency Band - 522 kHz ~ 1620 kHz
• FM Frequency Spacing - 50 kHz
• FM Frequency Band - 87.5 MHz ~ 107.9 MHz
Screen remains on continuously.
Screen goes blank (standby mode) after 10
seconds of inactivity. Touch the screen to exit
standby and view the display.
Screen goes blank (standby mode) after 20
seconds of inactivity. Touch the screen to exit
standby and view the display.
This setting dims the LCD screen when the
vehicle's headlights are turned on. Five settings
are pre-defined.
This setting allows the user to tune the RGB colors
of the LEDs to obtain an exact match for their
vehicle.
No beep sounds.
When turned on, an audible beep tone confirms
each function selection.
97