Audiovox VME 9725 NAV Mode D'emploi page 133

8. A prompt to pair or bond should appear on your mobile phone. Accept the request
and initiate the process.
NOTE: Some mobile phones require a "pass key" or pairing code to connect�
If your phone requires a pass key or pairing code, you will need to enter this
number� The default pairing code for many mobile phones is "0000"� The
default code for the unit is "1234"�
9. A prompt to enter a PIN number or passkey for the unit should appear. The default
passkey for the unit is "1234".
10. At this point a prompt stating pairing successful should appear. Another prompt
should appear asking connect to the unit, Yes or No. Press Yes. The mobile phone
and the unit should connect. The mobile phone should display a message similar
to "Device Connected" and the mobile phone and the unit are now connected.
VME 9725 NAV will appear on the mobile phone list of devices.
Managing Incoming Calls
When connected to a Bluetooth® mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth® screen below when a call is received.
The incoming phone number or assigned name for that number will appear in the
middle of the screen. An audible tone will sound from the unit and a graphic display
will appear on the front panel.
• Mute Mic icon: Touch to mute the microphone audio from the unit. Touch the icon
again to restore the microphone and audio from the unit.
Transfer to Phone icon: Touch to transfer a call back to the mobile phone.
•
• Internal Mic / External Mic icon: Touch to toggle between the internal microphone
and an external microphone.
• Hold icon: Touch to place a call on hold.
• icon: Touch to end an in coming call.
133