Audiovox VME 9725 NAV Mode D'emploi page 112

Controlling Playback
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.
Ejecting a Disc
Press the EJECT (
automatically reverts to Tuner mode. You may eject a disc with the unit powered off.
The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs, touch
and hold the EJECT (
resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, touch SRC on the front panel
to access the source menu. Touch the disc icon.
Repeat Playback
Touch the Repeat icon to alter repeat mode in the following sequence:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Touch A-B on the second page of DVD on-screen controls to set the start point (A)
of the repeated section.
• Touch A-B again once you reach the desired end point (B) of the repeated section.
The selected portion of the DVD will now repeat continuously.
• Touch A-B a third time to cancel the A-B section setting and stop repeat play.
) button on the front of the unit to eject the disc. The unit
) button to reset the loading mechanism. Normal operation
112