Audiovox VME 9725 NAV Mode D'emploi page 132

Hands Free Profile (HFP)
To use a mobile phone with this unit, it is necessary to first establish a connection
using Bluetooth® wireless technology. The connection is normally established using
Hands Free Profile (HFP), which gives you full control of functions available on the
mobile phone source. However, depending on your mobile phone, the connection
may be made using Head Set Profile (HSP), making some functions unavailable. This
is a limitation of your mobile phone, not the VME 9725 NAV.
Since there are a number of Bluetooth® mobile phone implementations available on
the market, operations with your Bluetooth® mobile phone using this unit vary greatly.
Please refer to the instruction manual that came with your Bluetooth® mobile phone
along with this manual while operating your mobile phone with this unit.
Pairing Your Mobile Phone with the Head Unit
Your mobile phone can initiate a search for new devices and pair to the unit. The
following paragraphs describes the pairing process.
NOTE: The following procedures are generic. Procedures for pairing mobile
phones may vary slightly from mobile phone manufacturer to mobile phone
manufacturer.
1. Press the SRC button on the front panel to access the Source Menu.
2. Touch the BT (Bluetooth) icon. The following screen will appear:
3. Set the Bluetooth function to ON.
4. Set the Auto Connect function to ON.
5. Access the mobile phone Bluetooth® function and set the function to ON.
6. Set the mobile phone Bluetooth® discover mode to ON.
NOTE: Some discovery modes have a time limit usually a minute before they are
automatically turned off.
7. Use the mobile phone's add a new device feature. A device or devices will appear
on your mobile phone display.
132