Usage Methods - Qlima NJOY 1007 Manuel D'utilisation

USAGE METHODS

1. Install batteries
Draw out the battery box and install the batteries according to marking direction. (Pic 1)
2. Turn on firepower switch
Turn on the switch and confirm the power indicator lights up. Then turn the switch
clockwise to "MAX". (Pic 2)
Note: When the temperature is too high, turn the knob switch counterclockwise to lower
the temperature.
3. Put charcoal into charcoal bowl
Put appropriate charcoal into the charcoal bowl. It had better not to exceed the "MAX"
mark line on the charcoal bowl. Too much charcoal may burn the food and damage the
coating of Aluminum BBQ tray. (Pic 3)
4. Add fire accelerant (alcohol paste or solid alcohol blocks)
a). Add alcohol paste
From the concave centre of charcoal bowl base, squeeze alcohol paste (about 25-30g)
round and round on the bottom. (Pic 4a)
b). Add solid alcohol blocks
Put solid alcohol blocks on the concave center of charcoal bowl base, four small pieces (
5g/pcs) or one big piece ( 20g/pcs), each time use 15-20g solid alcohol blocks. (Pic 4b)
Points for attention:
No need to add alcohol paste and solid alcohol blocks together. just choose one of them.
If you cannot accurately measure the usage amount of alcohol paste or solid alcohol
blocks, please refer to the "MAX" mark line. The alcohol paste or solid alcohol blocks
added should not exceed the " MAX" mark line. (Pic 4c)
It is dangerous to overuse alcohol paste or solid alcohol blocks
5. Ignite the alcohol paste or solid alcohol blocks.
Ignite the alcohol paste or solid alcohol blocks in the charcoal bowl base by ignitor. (Pic 5)
Before ignition, do not cover the charcoal bowl base with charcoal bowl.
6. Place charcoal bowl with charcoal into the charcoal bowl base.
Place the charcoal bowl on the charcoal bowl base by using matched tool. It takes about
3 minutes to ignite the charcoal. In the beginning, the smoke may cause eyes feel uncom-
fortable. Put the machine in well ventilated place for 3 minutes until the smell and smoke
disappear. (Pic 6)
7. Place s/s BBQ rack and s/s BBQ plate on the oil-receiving tray.
Place s/s BBQ rack and s/s BBQ plate on the oilreceiving tray.Begin to cook food until tem-
perature rises. (Pic 7)
4
33