Devon&Devon Jupiter 3 Instructions De Montage page 23

BEFORE YOU BEGIN
The electric towel warmer must be installed by qualified technical
personnel.
Check that the towel warmer is compatible with your mains
supply. The installer is responsible for installation.
Verify the presence of all items inside the package using the
Packing List included in the following page.
Also verify that none of the components show visible defects.
Care should be taken to avoid damage when installing or servicing
the towel rails by ensuring tools do not come into direct contact
with the product service.
If you should notice any defects please contact Devon&Devon
immediately.
Devon&Devon retains the right to modify the product for technical
or production reasons. We will not be held responsible for any
inconveniences caused by the above-mentioned changes.
IMPLEMENTS REQUIRED
A: Measuring tape
B: Allen wrench (2mm)
C: Pencil
D: Drill + Wall bit
E: Level
F: Flat-tip screwdriver
(
not supplied by devon
A
C
B
22
& )
devon
F
E
D