Flex PS 10.8 Notice D'instruction D'origine page 12

Intended use
The PS 10.8/18.0 battery adapter is intended
– for commercial use in industry and trade,
– for connection to FLEX AP10.8/AP18.0
type batteries,
– for connecting and operating external
consumers (heated jacket, or similar),
– for charging external devices via the USB
port.
The PS 10.8/18.0 battery adapter is not
suitable for charging AP 10.8/AP 18.0
batteries (e.g. by means of USB-connected
chargers).
Safety instructions for the battery
adapter
 Do not open the battery adapter. This may
result in malfunctions and injuries.
 Use only original batteries (see table
"Technical specifications"). The use of
other batteries, e.g. imitations,
reconditioned batteries or other makes,
increases the risk of injury and damage to
property by exploding batteries.
12
 Check the cables for connecting external
consumers for damage. A damaged cable
may cause fires.
Safety instructions for handling
batteries
 Do not open the battery. Short-circuiting
hazard!
 Protect the battery against heat, including
prolonged sunshine, fire, water and
moisture. Explosion hazard!
 A damaged or incorrectly used battery may
result in the emission of fumes. Ensure a
supply of fresh air and consult a doctor in the
event of any physical complications. The
fumes may irritate the respiratory tracts.
 Liquid may leak out of the battery if the
battery is incorrectly used. Avoid contact with
such liquid. If contact accidentally occurs,
rinse with water. If liquid contacts eyes, seek
medical attention. Liquid leaking from the
battery may cause irritation or burns.
 Recharge batteries only with chargers
recommended by the manufacturer. A
charger that is suitable for one type of battery
may create a fire hazard when used with
another battery.
PS 10.8/18.0