Disposal Information - Flex PS 10.8 Notice D'instruction D'origine

power saving mode is activated. Power is no
longer applied at the outputs. To deactivate
the power saving mode:
Remove the battery from the adapter and
then reinsert.
DC connecting socket
Insert the DC barrel plug of the device to be
connected into the adapter's DC connecting
socket.
USB port
NOTE
The USB 2.0 ports cannot be used to charge
all device types.
Insert the USB plug of the device to be
connected into one of the adapter's USB ports.
16
Pull the USB plug immediately from the
adapter USB port when the connection is no
longer needed.

Disposal information

EU countries only
Do not throw electric power tools into the
household waste! In accordance with the
European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its
incorporation into national law, used power tools
must be collected separately and recycled in an
environmentally friendly manner.
PS 10.8/18.0