Important information
Mounting instructions information
These mounting instructions are part of the Duravit
Noise reduction gasket and must be carefully read before
assembly.
Explanation of the key words and symbols
Is used to address practices not related
NOTICE
to physical injury.
Link to the mounting information in this section
Indication of the length of time (e.g. 10 minutes)
Indication of the temperature
Target readership and qualifications
The Noise reduction gasket may only be installed by
trained plumbers.
Risk of product and/or property
NOTICE
damage!
> Observe the local installation regulations and any
country-specific standards at all times.
Mounting instructions
Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.pro.duravit.com.
13
Mounting and aligning the feet (Image 13)
> The bathtub mounting instructions must be
observed when mounting and aligning the feet.
> Use the screws from the Noise reduction gasket.
15
Positioning the bathtub anchor (Image 15)
> Obtain the position of the bathtub anchors from
the mounting instructions for the bathtub.
18
Continue mounting (Image 18)
> Observe the mounting instructions for the bathtub
while installing.
ZU_M_Noise-reduction-set-bathtub/16.11.2
5