Niko 350-41601 Manuel Technique page 9

4. TECHNICAL DATA
Visible dimensions (fig. 2)
Invisible dimensions (fig. 2)
Drill diameter
Power supply voltage
Power consumption
Detection angle
Detection range
Mounting height
Ambient temperature
Protection degree
Protection class
Certification
Accessories
5. WARNINGS REGARDING INSTALLATION
• The installation should be carried out by a registered installer and in compliance with the applicable regulations.
• This user manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners.
Additional copies are available on the Niko website or via the Niko support service. The latest manual for this product is available on the Niko website at any time.
• During installation, the following should be taken into account (non-exhaustive list):
- the applicable laws, standards and regulations.
- the technology available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC declaration of conformity regarding this
product at www.niko.eu.
6. NIKO SUPPORT
In case of doubt or if you want to exchange the product in case of a defect, contact your wholesaler or the Niko support service:
• Belgium: +32 3 778 90 80
• The Netherlands: +31 183 64 06 60
Contact details and more information can be found at www.niko.eu under the "Help and advice" section.
7. WARRANTY PROVISIONS
• The warranty period is four years from the date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is no
invoice, the date of production applies.
• The consumer is obliged to inform Niko in writing about the non-conformity, within two months of noticing the defect.
• In case of a non-conformity, the consumer only has the right to a product repair or replacement free of charge, which shall be decided by Niko.
• Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless use, incorrect operation, transformation of the
product, maintenance that does not adhere to the maintenance instructions or an external cause, such as damage due to moisture or overvoltage.
• The compulsory regulations of the national legislation concerning the sale of consumer goods and the protection of the consumer in the countries where Niko
sells, directly or via sister companies, subsidiaries, chain stores, distributors, agents or permanent sales representatives, take priority over the above-mentioned
rules and regulations.
This product cannot be deposited in the unsorted waste. Take your discarded product to a recycling centre or a recognised collection point. Just like producers and importers,
you too play an important role in the promotion of sorting, recycling and reuse of waste electrical and electronic equipment. To finance the rubbish collection and waste treatment,
the government levies recycling charges in certain cases (included in the price of this product).
EN
5 x 95 mm (HxW)
90 x 77 mm (HxW)
77 mm
230 Vac ± 10%, 50 Hz
< 1 W
360°
circle, 8 – 12 m
2.4 – 3 m
0 – +50 °C
IP 20
class II devices, class I detector
CE marked in accordance with EN 60669-2-1
IR remote control (350-41934)
Universal remote control for smartphone (350-41936)
350-41601
9