Télécharger Imprimer la page

Jonsered LM2148CMD Manuel De L'utilisateur page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Grass Collection Indicator
1.
Your lawnmower has a grass collection indicator which
tells you when the grassbox needs emptying. (J4)
2.
When the indicator is at the top of the tube, grass
is being collected.
3.
When the indicator starts to drop, it's time to empty
the grassbox. Adopt a stationary position, keeping
the lawnmower running for 10 seconds. Release
the OPC lever and remove the grassbox for
emptying.(J5)
Emptying the Grassbox
1.
Release the latch on the grassbox. (J6)
2.
Release collection bag from grassbox frame. (J7)
3.
Empty grassbox. (J8)
IMPORTANT
Do not attempt any maintenance on your lawnmower
when the engine is hot.
Cleaning
IMPORTANT
Never use water for cleaning your lawnmower. Do not
clean with chemical, including petrol, or solvents - some
can destroy critical plastic parts.
1. Remove grass from under the deck with a brush (K1
and K2).
2. Using a soft brush - remove grass clippings from the
engine air intakes and exhaust (K3), cutting height
adjustment area. (K4), around the wheels (K5) and
the grassbox (K6 & K7).
3. Wipe over the surface of your lawnmower with a dry
cloth.
Cutting System
Removing the Blade (L)
Disconnect the spark plug lead.
1. Use spanner to loosen blade bolt by turning anti-
clockwise.
2. Remove the blade bolt, blade and spacer washer.
3. Inspect for damage and clean as necessary.
Fitting the Blade (L)
1. Fit the blade to the machine with the sharp edges
pointing away from the machine.
2. Re-assemble blade bolt through blade and spacer
washer.
3. Hold firmly and tighten blade bolt firmly with a
spanner. Do not over tighten.
Electrolux Outdoor Products are manufactured under an
Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for
recycling at the end of the products' life.
Packaging is recyclable and plastic components
have been labelled (where practical) for categorised
recycling.
Awareness of the environment must be considered
when disposing of 'end-of-life' product.
If necessary, contact your local authority for disposal
information.
BATTERY DISPOSAL
The battery should be taken to an Approved Service
Centre or your local Recycling Station.
Do NOT dispose of used battery with household
waste
Lead/Acid batteries can be harmful and should
Use - Mowing
Using as a mulcher
1.
2.
3.
4.
5.
6.
Maintenance
Always handle the blade with care - sharp edges
could cause injury.
USE GLOVES.
Renew your metal blade after 50 hours mowing or 2
years whichever is the sooner - regardless of
condition.
If the blade is cracked or damaged replace it with a
new one.
How to Charge the Battery (LM2148CMDE ONLY)
M1 - Wiring Loom
M2 - Charging Point
M3 - Cap
1. Stop your lawnmower.
2. Disconnect the spark plug.
3. Remove the cap from the charging point at the
4. Plug charger lead into connection on battery loom
5. Plug the battery charger into a domestic electric
6. Charging will then commence.
7. Charge for 24 hours.
8. After charging, disconnect the charger from the
9. Replace the cap on the charging point.
10. The unit is now ready for use.
Environmental Information
DISPOSAL OF FUELS AND LUBRICATING OILS
Your lawnmower is supplied with a mulching plug.
(J9)
Stop your lawnmower as described in Use -
starting and stopping, and disconnect the spark
plug.
Lift safety flap. Twist and slide mulching plug into
rear discharge chute. (J10)
Ensure mulching plug is securely fitted. (J11)
The mulching plug prevents grass from being
collected by blocking the collection chute on the
underside of the deck. (J12)
Ensure the safety flap is positioned correctly. (J13)
bottom of the wiring loom (M).
socket.
socket and charging point.
be disposed of through the recognised recycling
facility in accordance with European Regulation
Do NOT dispose of battery to water.
Do NOT incinerate
Wear protective clothing when handling any fuels
and lubricants.
Avoid contact with skin.
Remove petrol and engine oil before transporting
the product.
Contact your local authority for information of your
nearest Recycling/Disposal Station.
Do NOT dispose of used fuels/oils with
household waste
Waste fuels/oils are harmful, but can be
recycled and should be disposed of through the
recognised facilities.
Do NOT dispose of used fuels/oils to water.
Do NOT incinerate
ENGLISH - 4

Publicité

loading

Ce manuel est également adapté pour:

Lm2148cmde