WARNING
Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, setting into service,
use and maintenance.
For your own safety, always heed the advice and warnings in these instructions.
Non-compliance with these operating instructions may expose you to serious danger.
Only use the product in the places and conditions for which it is intended.
• ATTENTION! NO PROTECTION AGAINST DROWING!
• SWIMMERS ONLY!
• POOL USE ONLY!
• Full inflate all air chambers.
• Passenger numbers and load weight shall by no means exceed passenger number and maximum weight capacity in
specifications.
• This product should not be used as life saving device.
• Life saving device (life jacket and life buoy) must be prepared together and inspected.
• The product must be used with over three years old. Please use balance!
• Keep away from flames and fires.
• Before every use, carefully inspect all product components, to ensure everything is in good condition and tightly secured.
Please stop to repair if you find any damage.
• Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may punctured the
product.
• Don't leave the product exposed to sun for long periods of time, as high temperatures shall give rise to air expansion, which
can cause irreparable damage.
• Only to be used in water in which the child is within its depth and under adult supervision.
• Need adult help to keep balance.
• No standing on the toy.
• Always grab your toy when using it.
• The gun is only a toy and mustn't be used to attack persons or animals. Please do not aim at face or eyes. (For #41071 only)
• Please use only clean water. Do not fill in chemicals or other substances. (For #41071 only)
• Do not use your product if you suspect a puncture or leak.
• Proper inflation and use are critical to insure safety. Pay attention to ensure safety valve is tightly closed each time in use.
Check seams regularly for tears.
• Evenly distribute loads when use the product. Tipping and drowning may occur with uneven distribution of loads.
INFLATION
1. Before using the product, carefully check if there are any leaks or broken parts. Open safety valve and inflate with the air
pump (not include) to design working pressure on the product.
2. Inflate according the numbered air chambers by adult only. Fill the chambers until most of the wrinkles are gone and it feels
firm to touch but NOT hard. If you use other pressure gauge, the pressure should not be more than the specified pressure on
the product or on the instruction. Do not over-inflate the product. Do not use an air compressor.
Note: Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the product each
time before using.
3. Be sure to close the valves after inflation, press in the safety valves after inflation.
Note: Never stand on or rest objects on the product during inflation. Always check product for leaks before use.
DEFLATION
Open and pinch the bottom of the valves to deflate.
MAINTENANCE AND STORAGE
1. After deflation, use a damp cloth to gently clean all surfaces.
Note: Never use solvents or other chemicals that may damage the product.
2. Store in a cool, dry place and out of children's reach.
3. Check the product for damage at the beginning of each season and at regular intervals when in use.
REPAIR
If a chamber is damaged use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
OWNER'S MANUAL
5
S-S-005223