Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ing starts. During cooking:
press once to stop oven; twice
to stop and clear all entries.

FUNCTIONS

1. Power Level
11 power levels are available. Use the digit keys to input the power
level with the number corresponding to the power percentage. For
example: PL2 = 20% power ; PL7 = 70% power
2. Set the clock
Press "CLOCK ", "00:00" will display.
Press the number keys and enter the current time. For example, time
is 12:10, press "1,2,1,0" in sequence.
Press " CLOCK " to set the clock. The hour separator ":" will blink to
confirm input.
If the numbers input are not within the range of 1:00-12:59, the set-
ting will be invalid until valid numbers are input.
In the process of clock setting, if the " STOP/CANCEL " button is
pressed or if there is no operation within 1 minute, the oven will go
back to the prior setting automatically.
To reset the clock, repeat the above steps.
3. Kitchen Timer
Press "KITCHEN TIMER", the display will show 00:00
Press the number keys and enter the timer time. (the maximum cook-
ing time is 99 minutes and 99 seconds)
Press " START/+30SEC. " to begin the timer.
When the timer ends, the buzzer will ring 5 times and the display will
show the current time.
NOTE: While using the timer, other microwave functions are unusable
unless the timer is stopped.
4. Microwave cooking
Press "TIME COOK" once, the LED will display "00:00".
Press number keys to input the cooking time; the maximum cooking
time is 99 minutes and 99 seconds.
Press " POWER" once, LED will display "PL10". The default power level
is 100% power. Press the number keys to adjust the power level.
Press " START/+30SEC." to start cooking.
Example: to cook the food with 50% microwave power for 15 minutes.
10. Memory function
11. Start/+30 seconds
7

Publicité

Table des Matières
loading

Table des Matières