Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FUNCTIONS

1.
Power Level
11 power levels are available. Use the digit keys to input the power level with the
number corresponding to the power percentage. For example: PL2 = 20% power ; PL7
= 70% power
Level
10
9
Power
100% 90%
Display
PL10
PL9
2.
Set the clock
Press "CLOCK ", "00:00" will display.
Press the number keys and enter the current time. For example, time is 12:10, press
"1,2,1,0" in sequence.
Press " CLOCK " to set the clock. The hour separator ":" will blink to confirm input.
If the numbers input are not within the range of 1:00-12:59, the setting will be invalid
until valid numbers are input.
In the process of clock setting, if the " STOP/CANCEL " button is pressed or if there is
no operation within 1 minute, the oven will go back to the prior setting automatically.
To reset the clock, repeat the above steps.
3.
Kitchen Timer
Press "KITCHEN TIMER", the display will show 00:00
Press the number keys and enter the timer time. (the maximum cooking time is 99
minutes and 99 seconds)
Press " START/+30SEC. " to begin the timer.
When the timer ends, the buzzer will ring 5 times and the display will show the current
time.
NOTE: While using the timer, other microwave functions are unusable unless the timer
is stopped.
4.
Microwave cooking
Press "TIME COOK" once, the LED will display "00:00".
Press number keys to input the cooking time; the maximum cooking time is 99 min-
utes and 99 seconds.
Press " POWER" once, LED will display "PL10". The default power level is 100% power.
Press the number keys to adjust the power level.
Press " START/+30SEC." to start cooking.
8
7
6
80%
70%
60%
PL8
PL7
PL6
8
5
4
3
50%
40%
30%
PL5
PL4
PL3
2
1
0
20%
10%
0%
PL2
PL1
PL0

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cm-0996k

Table des Matières