5. Supply of Combustible Air
When a stove is installed in a room, the demand for air supply to the room increases. Air can be provided
indirectly via a vent in the outer wall or via a duct from the outside that is connected to the connector underneath
3
the stove. The amount of air needed for combustion is approx. 25 m
/h.
The connector has an external diameter of 100 mm.
In hot areas the duct should be insulated to prevent condensation formation. For this purpose, use 25 mm mineral
wool covered with a moisture inhibitor. It is important that the lead-in between the pipe and the wall (or floor) is sealed
using jointing compound.
Supply of combustion air through the bottom plate
Applies to all versions.
The bottom plate is "combustion air"-ready.
UK - 5