Orion Steel, Orion Soapstone And Troja - Jydepejsen SIRIUS Manuel D'utilisation

3.
Installation of Sirius Steel, Sirius Soapstone, Orion Steel, Orion Soapstone and Troja 44-45-46
Jydepejsen stoves are tested by specialist institutions and get approved according to applicable legislative requirements.
Before final approval is granted, the stoves must successfully complete a variety of combustion tests. The stove tested
featured a top flue outlet. The wood used for the tests was birch, with a moisture content of 12–20%.
Jydepejsen's professional distributors will be able to advise you on the requirements for this type of wood-burning stove
and provide further instructions regarding correct installation. Your distributor / chimney sweep will also be able to tell you
exactly which chimney you need. Below is an illustration of wall and corner installation with and without insulated flues.
The illustrations below depict Sirius Steel but they apply also to Sirius Soapstone, Orion Steel, Orion Soapstone and Troja 44-45-46.
Sirius Steel, Sirius Soapstone,
Orion Steel, Orion Soapstone
and Troja 44-45-46
without insulated flues.
All distances are minimum distances.
Sirius Steel, Sirius Soapstone,
Orion Steel, Orion Soapstone
and Troja 44-45-46 with
insulated flues.
All distances are minimum distances.
Installation distance in case of non-combustible wall.
We recommend a minimum distance of 50 mm to non-combustible materials for cleaning
purposes. There has to be access to the cleaning covers at all times.
UK - 3
Distance to combustible materials.