Ts 300 Beltpack Transmitter - Beyerdynamic Opus 300 Notice D'utilisation

3.

TS 300 Beltpack Transmitter

3.1 Controls and Indicators
Audio input socket, 4-pin connection for microphones (lavalier, headsets). There are 5
1
different connections.
ON/OFF switch (ON = switch to "ON"-position; OFF = switch to "OFF"-position). Switch
2
off the transmitter when not in use.
Battery status LED to indicate the power on / off and battery status.
3
(a) When the beltpack transmitter is switched on this LED will flash for a moment to
indicate the normal battery status.
(b) When the LED stays red after having switched on the transmitter the battery is too
weak and must be replaced.
Transmitting antenna
4
Casing
5
Infrared receiving diode for ACT function
6
Gain control to adjust input gain
7
GT/MT switch: When you use electric guitars this switch must be in the "GT"-position. In
8
the GT mode the gain control is deactivated. Switch to the "MT"-position when you use
condenser and wired microphones. In the MT mode the gain control is activated.
Battery compartment and cover
9
41