Kamikaze Volpi KV 100 Manuel D'utilisation page 63

ElEctrical PolE PrunEr
• When operating the tool hold it firmly with one hand, and keep the blade
at least at 15cm from the other hand and other parts of the body.
• Do not use the tool in the proximity of flammable liquids or gasses. Fire
and explosion risk exists in the event of a short circuit
• The blades have to be checked for wear in regular intervals and reshape
ended. Blunt blades will overload the machine. Resulting damages are
not covered by warranty.
• Do not attempt to repair the tool your-self, bring the tool to our Service
Center in case of need. All works, which are not described in this manual,
may only be performed by our Service-Centre.
4.3 Special Safety inStruction for battery tool
• Make sure the battery switch is in "OFF" position before insert battery.
The equipment can be damaged if inserting the battery at switch on.
• Charger design for use only indoor. Charging operations have to be
performed indoor.
• Disconnect power before to clean the charger to avoid damage and risk
of electrical shock.
• Don't expose battery in strong light. Don't put battery on hot surface. It can
cause battery explosion.
• Fully cold battery before charging.
• Don't disassemble the battery, don't damage battery, in order to avoid injury.
4.4 uSe charger correctly
• Charger only use on rechargeable battery. If not it can cause fire or
explode. Use original charger to keep safety.
• Always check charger, wire and plug before use. If damaged, please
move to Customer Assistance Service to repair.
• Don't use damaged charger, don't repair by yourself, this will keep the
tool safe.
• Check voltage of charger match the battery value, if not may injury yourself.
63
www.kamikazevolpi.com