Putting Into Operation - Abicor Binzel ABIDOT Mode D'emploi

6 Putting into operation

6 Putting into operation
6.1 Charging the ABIDOT battery
1
7
6
1 On / Off switch
2 USB charging socket
3 Mini USB
Charging the ABIDOT battery
Fig. 4
EN - 10
NOTICE
• The system may only be installed and put into operation by qualified
personnel (in Germany see TRBS 1203).
2
5
4 Universal power supply unit
5 Connector attachment
The operating time of the rechargeable battery is approximately 7 hours.
NOTICE
• Repeated full discharges of the battery reduce the battery's service life.
1 Switch off the ABIDOT before placing it in the charging station (6).
2 Attach the required connector attachment (5) to the universal
power supply unit (4).
3 Connect the universal power supply unit (4) to the ABIDOT (7).
4 Plug the universal power supply unit (4) into the power receptacle. The
complete charging time is approximately 30 min.
3
Min.
30
Hours 7
4
6 Charging station
7
ABIDOT
ABIDOT
Charging time
Operating time