Abicor Binzel ABIDOT Mode D'emploi page 19

ABIDOT
1 Identification
1 Protective case
2 Power supply unit with charging cable and
replaceable mains plugs
Fig. 1 Overview ABIDOT
1.1 CE marking
2 Safety
The ABIDOT robot programming tool is used in industry as a tool for non-
contact programming of a work-piece via a robot. The following welding torch
adaptors are available:
A360, A500, W500, 455D TS, 505, VTS500, W600, 650TS, 652D TS.
These operating instructions describe the ABIDOT programming tool. The
programming tool may only be operated using original ABICOR BINZEL
spare parts.
1
5 4
3 Adapter sleeve
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
The enclosed safety instructions must be observed.
2
3
4 ABIDOT
1 Identification
5 Charging station
EN - 3